| | |
 | "Lite" Wrench Adjustable AN wrench
"Lite" Wrench is a precision
The opening range of the wrench is from -3 thru -16 tube sizes (0"-1.531"). The Dzus blade is standard,.
A set of upper quality, open end AN wrenches cost approximately £85.00 for 9 wrenches that you can't carry in your back pocket!!
Metric AN fittings are now being introduced into the U.S. which will make the adjustable wrench a necessity in the near future!
Anodizing is not offered due to the 7075-T351 grade of aluminum they are made of. CNC piece, machined and assembled in the USA. They are electrolysis nickel plated for looks and durability. There are Belleville and wave washers incorporated into the thumbscrew to create the proper friction to hold the jaw at the desired location. The thumbscrew has a machine cut "knurl" for a non-slip, positive action
Price Including Shipping: £111.63 (Including: VAT at 17.5%)
|
|
|
 | Rear Drive Shaft
Custom built to take the stresses and strains of use in the monster tuck application this drive shaft is built to last..
Price Including Shipping: £934.13 (Including: VAT at 17.5%)
|
|
|
| | Front Drive Shaft
Custom built to take the stresses and strains of use in the monster tuck application this drive shaft is built to last..
Price Including Shipping: £934.13 (Including: VAT at 17.5%)
|
|
|
 | Limit straps:
LAS use, endorse and highly recommend the limit straps supplied by our sponsor Bee Web. Available in any length/ width combination, or as a truck set to fit any LAS chassis.
Price Including Shipping: £229.13 (Including: VAT at 17.5%)
|
|
|
| | Hydraulic hoses:
Many people supply hydraulic hoses. LAS have never burst an LAS supplied hose on any of our trucks. We think that is a good recommendation.
Complete LAS truck set, all the hose you need..
Price Including Shipping: £2,232.50 (Including: VAT at 17.5%)
|
|
|
| | Hydraulic bump stops:
Available for all trucks, from monsters to off road race trucks. Built in house at the LAS workshops, and as such can be built to any specification. Length, O.D. etc.
Price Including Shipping: £270.25 (Including: VAT at 17.5%)
|
|
|
 | R.I.I. Radios:
An LAS Exclusive, the RII radio has to be the single most important safety item ever fitted to a monster truck. Providing the ability to “switch off” the ignition system on any monster truck from over 100 metres away, no truck should be built for any use without one. Mandatory equipment for any truck racing in the EMTRC and also mandatory for MTRAE certification.
Price Including Shipping: £821.33 (Including: VAT at 17.5%)
|
|
|
| | Rear steer kits:
All our rear steering components are sourced via Vince Nowack in the USA. His rear steer kit is the industries best and the only one we sell.
Price Including Shipping: £705.00 (Including: VAT at 17.5%)
|
|
|
| | Danfos steering units:
All our steering components are sourced via Vince Nowack in the USA. Comes complete with the MTRAE required blow off valve fitted.
Price Including Shipping: £446.50 (Including: VAT at 17.5%)
|
|
|
 | Pro Ratchet shifters:
Its flat out impossible to pull the wrong gear with this shifter. That's why we use it, and that's why we sell it.
Price Including Shipping: £264.38 (Including: VAT at 17.5%)
|
|
|
 | Hot Foot throttle pedals:
Used throughout the monster truck industry they are simply “the best”.
Price Including Shipping: £68.39 (Including: VAT at 17.5%)
|
|
|
| | Five point Harnesses:
LAS use and supply RGS 5 point harnesses. If they can keep Nigel in his seat they can keep you in yours!
Price Including Shipping: £185.65 (Including: VAT at 17.5%)
|
|
|
| | Driver's seats:
LAS use and supply BEARD racing seats. These top quality seats are custom built to your own body shape for a perfect fit.
Price Including Shipping: £1,756.63 (Including: VAT at 17.5%)
|
|
|
| | Electrical looms:
Developed by LAS just to make our life easier, but now available for re-sale to make your life easier too.
Price Including Shipping: £699.13 (Including: VAT at 17.5%)
|
|
|
| | Cable sets:
LAS have developed a monster truck standard cable set that includes all of the control cables that you will to have your truck meet the MTRAE certification.
Price Including Shipping: £428.88 (Including: VAT at 17.5%)
|
|
|
 | Monster Truck bodies:
LAS have moulds for the 97 Ford F150 body used on the BIGFOOT® and Monstrous race trucks, and as such are able to supply a complete body or replacement panels as required. LAS also have close links with GTS fibreglass in the USA , the home of monster truck bodies for over 20 years. These bodies are un painted.
Price Including Shipping: £1,586.25 (Including: VAT at 17.5%)
|
|
|
| | Transfer case (drop box):
LAS have used the industry standard Pro Fab transfer cases on every monster truck we have built, and always will. The Pro Fab rocks!
Price Including Shipping: £3,583.75 (Including: VAT at 17.5%)
|
|
|
| | Transmissions:
At one stage BIGFOOT ® #17 was eating gearboxes like they were sweets. That was until we found STA Automatics. These miracle workers are now the only people who we will have work on our transmissions. Needless to say if you order a transmission from LAS it will have an STA sticker on it.
Price Including Shipping: £4,112.50 (Including: VAT at 17.5%)
|
|
|
 | Superchargers:
LAS are European agents for the BDS line of Blowers and blower related products. As all drag racers say, “injection is nice but I'd rather be blown” and with BDS and LAS being blown is just a phone call away! Prices from £3800 +VAT
Price Including Shipping: £4,465.00 (Including: VAT at 17.5%)
|
|
|
| | Motor plates:
Once you have an awesome motor there is no point wasting horsepower by letting the motor twist on foo foo rubber engine mounts. The LAS motor plates are the perfect answer. Motor plates are available from stock for Ford & Chevy with Dodge available to order.
Price Including Shipping: £229.13 (Including: VAT at 17.5%)
|
|
|
 | Engines:
It makes no difference to us if you are a Ford, Dodge or Chevy guy, at LAS we can supply the right engine for your project truck. From “mild” 500cuin “crate” motors through to custom-built 572cuin “full race” motors we can and do help. Prices starting from £5000 +VAT and rising to £37,000 +VAT
Price Including Shipping: £5,875.00 (Including: VAT at 17.5%)
|
|
|
| | Transport Tyres:
LAS only sells new tyres for transport wheels, as anything else is just false economy.
Price Including Shipping: £99.88 (Including: VAT at 17.5%)
|
|
|
| | Transport wheels:
LAS transport wheels are the lightweight low cost option for transport wheels. With no “lugs” to break off you can be assured of years of service from these babies.
Price Including Shipping: £116.33 (Including: VAT at 17.5%)
|
|
|
 | Race Tyres:
All monster trucks must use a tyre that is 66” tall, but from there the sky is the limit. LAS have pioneered the use of “cut” racing tyres in Europe . We are now able to offer this service to our customers either on their current tyres (if suitable) or to tyres supplied by LAS. The number of designs and possibilities is limited only by your imagination.
Price Including Shipping: £2,115.00 (Including: VAT at 17.5%)
|
|
|
| | Race Wheels:
LAS Monster truck racing wheels are a one piece deep well construction, making tyre fitment as easy as it can be, while providing superior strength combined with light weight.
Price Including Shipping: £464.13 (Including: VAT at 17.5%)
|
|
|
 | Axles:
LAS pioneered the use of the ITL SD70 axle in Monster Truck racing; this axle is now well established and has many benefits over the more traditional axles. Lightweight (by comparison), internal wet brakes on each axle shaft, and with a powered track rod for steering they provide and excellent solution to the axle issue. Starting from:
Price Including Shipping: £5,581.25 (Including: VAT at 17.5%)
|
|
|
 | Lexan:
Available in pre cut panels to fit the LAS monster truck chassis or as complete sheets, Lexan keeps the driver safe and the truck MTRAE certifiable.
Price Including Shipping: £587.50 (Including: VAT at 17.5%)
|
|
|
 | Monster Truck Chassis:
The chassis that are built by Dan Patrick in the USA are acknowledged as the “Industry Standard” with well over 70 chassis now having been built.
It is our ambition to become the “Patrick Enterprises” of the European monster truck industry, and we're not off to a bad start.
LAS Supertrux Ltd chassis won the European Monster Truck Racing Championships in 2003, 2005, 2006 & 2007
Built using CDS with 50mm O.D. and 3.2mm wall tubing, all bends are CNC bent on a mandrel bender to guarantee section stability in the wall of the tube at the bending moment. All LAS chassis are built in a hollow section Jig to ensure accuracy and alignment.
LAS are able to tailor the chassis build to individual customer requirements, with roll cage specifications to suit Ford, Chevy and Dodge body styles. Prices start at £2500 +VAT
Price Including Shipping: £6,462.50 (Including: VAT at 17.5%)
|
|
|
| | Nitrogen Springs:
The perfect accompaniment to the LAS shocks, these nitrogen springs provide the weight carrying capacity that is needed, but with 100% tuneability. By simply raising or lowering the Nitrogen pressure you are able to raise or lower the effective spring rate of your monster truck.
Price Including Shipping: £528.75 (Including: VAT at 17.5%)
|
|
|
 | Custom built shock absorbers:
Tailored not only to length of travel but also custom valving to suit your driving style. We are the only company in the UK that builds monster truck shocks that allow the shock firmness to be adjusted endlessly, by changes to the valving shims.
Price Including Shipping: £763.75 (Including: VAT at 17.5%)
|
|
|
| | Sway Bar kits
The complete sway bar solution which includes, main sway bar, two mounting blocks, and a pair of drop links. These are essential for use with Nitrogen shocks. Priced each:
Price Including Shipping: £1,527.50 (Including: VAT at 17.5%)
|
|
